機構人員
孫文權
研究員、碩士生導師
電子郵件: wqsun18@163.com
科研方向
（1）大型裝備熱、力、電磁多場耦合建模研究；
（2）板帶產品多工序質量控制，冷軋產品板形及質量控制；
（3）大型裝備過程建模及控制理論；
（4）冷軋全流程質量智慧控制技術；
（5）鋼鐵工業生產智能化發展及智能工廠建設應用；
（6）加熱爐智能燃燒控制系統;
（7）大數據智能工藝模型及控制；
（2）板帶產品多工序質量控制，冷軋產品板形及質量控制；
（3）大型裝備過程建模及控制理論；
（4）冷軋全流程質量智慧控制技術；
（5）鋼鐵工業生產智能化發展及智能工廠建設應用；
（6）加熱爐智能燃燒控制系統;
（7）大數據智能工藝模型及控制；
社會職務
《軋鋼》雜志編委
《鋼鐵》雜志青年編委
《鋼鐵研究學報》雜志青年編委
《Journal of Iron and Steel Research , International》雜志青年編委
《鋼鐵》雜志青年編委
《鋼鐵研究學報》雜志青年編委
《Journal of Iron and Steel Research , International》雜志青年編委
簡歷
2001.09 – 2005.07 北京科技大學 學士學位
2005.09 – 2010.04 北京科技大學 博士學位
2010.04 – 2012.07 北京科技大學 博士后
2012.07 – 2016.06 北京科技大學 高效軋制國家工程研究中心，助理研究員
2016.06 – 2017.01 加拿大麥克馬斯特大學先進控制技術研究中心，訪問學者
2017.01 – 2017.07 北京科技大學工程技術研究院，助理研究員
2017.07 – 2024.07北京科技大學工程技術研究院過程控制研究所所長 副研究員，碩士生導師
2024.07 – 今 北京科技大學工程技術研究院過程控制部部長 研究員，碩士生導師
2005.09 – 2010.04 北京科技大學 博士學位
2010.04 – 2012.07 北京科技大學 博士后
2012.07 – 2016.06 北京科技大學 高效軋制國家工程研究中心，助理研究員
2016.06 – 2017.01 加拿大麥克馬斯特大學先進控制技術研究中心，訪問學者
2017.01 – 2017.07 北京科技大學工程技術研究院，助理研究員
2017.07 – 2024.07北京科技大學工程技術研究院過程控制研究所所長 副研究員，碩士生導師
2024.07 – 今 北京科技大學工程技術研究院過程控制部部長 研究員，碩士生導師
代表性著作
專著：
Sun Wenquan, Yang Tingsong, He Anrui, Liu Chao.Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip，Metallurgical Industry Press，2024.03
論文：
(1)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling. J. Iron Steel Res. Int, 2024, 31: 428-441. (中科院2區, TOP, JCR Q2,IF 2.5).
(2)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel. J. Iron Steel Res. Int, 2024, 31: 688–699. (中科院2區, TOP, JCR Q2,IF 2.5).
(3)Tianlun Li, Wenquan Sun*, Anrui He, et al. A defect recognition model for cross-section profile of hot-rolled strip based on deep learning. J. Iron Steel Res. Int, 2023, 30: 2436–2447. (中科院2區, TOP, JCR Q2,IF 2.5).
(4)Tieheng Yuan, Wenquan Sun*, Simeng Chen. Fatigue-Damage Prediction Model of Backup Roll of Hot Strip Mills and its Applications. J Fail. Anal. and Preven. 2023, 23: 880–893.(EI).
(5)Wenquan Sun*, Luzhen Chen, Anrui He, et al. Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy. Int J Adv Manuf Technol, 2023, 127: 2881–2892. (中科院3區,JCR Q3,IF 3.4).
(6)Wenquan Sun*, Tieheng Yuan, Zhangyu Wu, et al. Optimization Model of the Cold Rolling Roll Grinding Volume Based on Nonlinear Fatigue Accumulation Regulation. J Fail. Anal. and Preven, 2023, 23: 2131–2141.( EI).
(7) Wenquan Sun, Ting-song YANG, An-Rui HE, Chao LIU, Jian SHAO. . Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip, 2023, ISBN: 978-7-5024-9698-2.
(8)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on Thickness Defect Control of Strip Head Based on GA-BP Rolling Force Preset Model. METALS, 2022, 12(6): 924. (中科院3區,JCR Q3,IF 2.9).
Wenquan Sun*, Anrui He, Chao Liu, et al. Analytical Study on Longitudinal Buckling Deformation Behavior of Wide-width and Thin-size Hot Rolled Strip. Journal of Mechanical Engineering, 2022, 58(14): 203-211. (機械學科TOP, EI) .
(9)Tieheng Yuan, Wenquan Sun*, Anrui He, et al. Research on quarter wave shape control of cold rolled high strength steel based on BP-MOPSO. Int J Adv Manuf Technol, 2022, 122: 3867–3880. (中科院3區,JCR Q3,IF 3.4).
(10)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation. Int J Adv Manuf Technol, 2022, 123: 83–98. (中科院3區,JCR Q3,IF 3.4).
(11)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Study on quarter-wave generation mechanism in DP980 steel during cold rolling. Int J Adv Manuf Technol, 2022, 120: 313-327. (中科院3區,JCR Q3,IF 3.4).
(12)施劍睿,孫文權*,陳祿禎,等. 基于極限靜摩擦力矩的軋機打滑預測模型.鋼鐵, 2021, 56(09):96-101. (中文核心).
(13)于海軍,何安瑞,孫文權*,等. 薄寬帶材局部縱向屈曲的辛彈性力學求解方法.固體力學學報, 2021, 42(05):576-585. (中文核心).
(14)Sun Wenquan , Zhang Xiyang, He Anrui, Liu Dongye. Research on Local Buckling of High Accuracy Cold Rolled Thin Strip at Local High Point in Coiling Process [J]. La Metallurgia Italiana. 2016, 1.
(15)孫文權，郝溥俊，邵健，何安瑞. 基于數值分析和預測控制的寬幅冷軋帶材平坦度閉環控制策略及應用研究[J].工程學學報，2016, 38(1):10-14.
(16)Wenquan Sun, Jian Shao, Anrui He, Haishan Zhao, and Jie Zhou. RESEARCH ON RESIDUAL STRESS QUANTITATIVE REDUCTION IN LAMINAR COOLING ON HOT STRIP MILL [J]. International Journal of Heat and Technology. 2015, 33(4):19-24.
(17)Wenquan Sun, Jian Shao, Anrui He, Pujun Hao. Research on Distribution of Residual Stresses of Cold Rolled Sheet Distorted Area Based on ANSYS [J]. MANUFACTURING TECHNOLOGY, 2015, 15(1):22-29
(18)孫文權，何安瑞，邵健，張飛，智建偉. 高精度冷軋板帶質量改進新技術研究與實踐, 冶金自動化, , 2015,39(3):8-12
(19)Wenquan Sun, Jian Shao, Anrui He, Performance Optimization of Artifcial Metabolic Algorithm on Rolling Automation Control[J], Journal of Computational Information Systems,2014, v10(20), p 8715-8722
(20)Wenquan Sun, Jian Shao, Anrui He,Quan Yang. The Application Development of Coiling Eccentricity Control Based on Wavelet Transform [J]. The Open Automation and Control Systems Journal, 2014, 6:1310-1316.
(21)Wenquan Sun, Jian Shao, Anrui He. Coiling eccentricity compensation control system based on BP Neural Network Algorithm[C], 2011 International Conference on Electronics, Communications and Control, ICECC 2011 - Proceedings, p 1945-1950, 2011
(22)SUN Wen-quan, YANG Quan， SHAO Jian， SUN Hao. Research on High Precision Profile Control Technique of Silicon Steel for UCM Tandem Cold Rolling Mill[C] , 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, 5926-5929
(23)孫文權，楊荃，邵健等. UCM冷連軋機硅鋼邊降控制技術研究[J], 北京科技大學學報, 2010，32(10)：1340-1345.
(24)Wenquan Sun, Quan Yang，Anrui He ,Xinyu Guo. Research of the Strategy on the Flatness and Gauge Control Based on Coiling Variable Tension Control Process[J], Advanced Materials Research, 2013,v572(376): 98-103,
(25)孫文權，楊荃，何安瑞，郭新宇. 冷連軋板形板厚耦合關系及其解耦設計研究[J], 鋼鐵,2012,47(6): 46-50(26)孫文權，楊荃，邵健，何安瑞. 單機架冷軋機全干擾耦合模型的分步解耦設計[J], 鋼鐵研究學報, 2010,22(8):8-12
(27)孫文權，楊荃. 單機架冷軋機全干擾耦合模型的建立與分析[J], 鋼鐵,2010,45(1): 18-24
孫文權，楊荃，鵬鵬，王曉晨，劉天武. 全連續冷連軋機張力控制系統[J], 冶金自動化,2009,33(3):20-25)
Sun Wenquan, Yang Tingsong, He Anrui, Liu Chao.Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip，Metallurgical Industry Press，2024.03
論文：
(1)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling. J. Iron Steel Res. Int, 2024, 31: 428-441. (中科院2區, TOP, JCR Q2,IF 2.5).
(2)Wenquan Sun*, Shengyi Yong, Tieheng Yuan, et al. Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel. J. Iron Steel Res. Int, 2024, 31: 688–699. (中科院2區, TOP, JCR Q2,IF 2.5).
(3)Tianlun Li, Wenquan Sun*, Anrui He, et al. A defect recognition model for cross-section profile of hot-rolled strip based on deep learning. J. Iron Steel Res. Int, 2023, 30: 2436–2447. (中科院2區, TOP, JCR Q2,IF 2.5).
(4)Tieheng Yuan, Wenquan Sun*, Simeng Chen. Fatigue-Damage Prediction Model of Backup Roll of Hot Strip Mills and its Applications. J Fail. Anal. and Preven. 2023, 23: 880–893.(EI).
(5)Wenquan Sun*, Luzhen Chen, Anrui He, et al. Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy. Int J Adv Manuf Technol, 2023, 127: 2881–2892. (中科院3區,JCR Q3,IF 3.4).
(6)Wenquan Sun*, Tieheng Yuan, Zhangyu Wu, et al. Optimization Model of the Cold Rolling Roll Grinding Volume Based on Nonlinear Fatigue Accumulation Regulation. J Fail. Anal. and Preven, 2023, 23: 2131–2141.( EI).
(7) Wenquan Sun, Ting-song YANG, An-Rui HE, Chao LIU, Jian SHAO. . Formation Mechanism and High Precision Continuous Rolling Control Technologyof Wide-with and Thingauge Cold Rolled Strip, 2023, ISBN: 978-7-5024-9698-2.
(8)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on Thickness Defect Control of Strip Head Based on GA-BP Rolling Force Preset Model. METALS, 2022, 12(6): 924. (中科院3區,JCR Q3,IF 2.9).
Wenquan Sun*, Anrui He, Chao Liu, et al. Analytical Study on Longitudinal Buckling Deformation Behavior of Wide-width and Thin-size Hot Rolled Strip. Journal of Mechanical Engineering, 2022, 58(14): 203-211. (機械學科TOP, EI) .
(9)Tieheng Yuan, Wenquan Sun*, Anrui He, et al. Research on quarter wave shape control of cold rolled high strength steel based on BP-MOPSO. Int J Adv Manuf Technol, 2022, 122: 3867–3880. (中科院3區,JCR Q3,IF 3.4).
(10)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation. Int J Adv Manuf Technol, 2022, 123: 83–98. (中科院3區,JCR Q3,IF 3.4).
(11)Luzhen Chen, Wenquan Sun*, Anrui He, et al. Study on quarter-wave generation mechanism in DP980 steel during cold rolling. Int J Adv Manuf Technol, 2022, 120: 313-327. (中科院3區,JCR Q3,IF 3.4).
(12)施劍睿,孫文權*,陳祿禎,等. 基于極限靜摩擦力矩的軋機打滑預測模型.鋼鐵, 2021, 56(09):96-101. (中文核心).
(13)于海軍,何安瑞,孫文權*,等. 薄寬帶材局部縱向屈曲的辛彈性力學求解方法.固體力學學報, 2021, 42(05):576-585. (中文核心).
(14)Sun Wenquan , Zhang Xiyang, He Anrui, Liu Dongye. Research on Local Buckling of High Accuracy Cold Rolled Thin Strip at Local High Point in Coiling Process [J]. La Metallurgia Italiana. 2016, 1.
(15)孫文權，郝溥俊，邵健，何安瑞. 基于數值分析和預測控制的寬幅冷軋帶材平坦度閉環控制策略及應用研究[J].工程學學報，2016, 38(1):10-14.
(16)Wenquan Sun, Jian Shao, Anrui He, Haishan Zhao, and Jie Zhou. RESEARCH ON RESIDUAL STRESS QUANTITATIVE REDUCTION IN LAMINAR COOLING ON HOT STRIP MILL [J]. International Journal of Heat and Technology. 2015, 33(4):19-24.
(17)Wenquan Sun, Jian Shao, Anrui He, Pujun Hao. Research on Distribution of Residual Stresses of Cold Rolled Sheet Distorted Area Based on ANSYS [J]. MANUFACTURING TECHNOLOGY, 2015, 15(1):22-29
(18)孫文權，何安瑞，邵健，張飛，智建偉. 高精度冷軋板帶質量改進新技術研究與實踐, 冶金自動化, , 2015,39(3):8-12
(19)Wenquan Sun, Jian Shao, Anrui He, Performance Optimization of Artifcial Metabolic Algorithm on Rolling Automation Control[J], Journal of Computational Information Systems,2014, v10(20), p 8715-8722
(20)Wenquan Sun, Jian Shao, Anrui He,Quan Yang. The Application Development of Coiling Eccentricity Control Based on Wavelet Transform [J]. The Open Automation and Control Systems Journal, 2014, 6:1310-1316.
(21)Wenquan Sun, Jian Shao, Anrui He. Coiling eccentricity compensation control system based on BP Neural Network Algorithm[C], 2011 International Conference on Electronics, Communications and Control, ICECC 2011 - Proceedings, p 1945-1950, 2011
(22)SUN Wen-quan, YANG Quan， SHAO Jian， SUN Hao. Research on High Precision Profile Control Technique of Silicon Steel for UCM Tandem Cold Rolling Mill[C] , 2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, 5926-5929
(23)孫文權，楊荃，邵健等. UCM冷連軋機硅鋼邊降控制技術研究[J], 北京科技大學學報, 2010，32(10)：1340-1345.
(24)Wenquan Sun, Quan Yang，Anrui He ,Xinyu Guo. Research of the Strategy on the Flatness and Gauge Control Based on Coiling Variable Tension Control Process[J], Advanced Materials Research, 2013,v572(376): 98-103,
(25)孫文權，楊荃，何安瑞，郭新宇. 冷連軋板形板厚耦合關系及其解耦設計研究[J], 鋼鐵,2012,47(6): 46-50(26)孫文權，楊荃，邵健，何安瑞. 單機架冷軋機全干擾耦合模型的分步解耦設計[J], 鋼鐵研究學報, 2010,22(8):8-12
(27)孫文權，楊荃. 單機架冷軋機全干擾耦合模型的建立與分析[J], 鋼鐵,2010,45(1): 18-24
孫文權，楊荃，鵬鵬，王曉晨，劉天武. 全連續冷連軋機張力控制系統[J], 冶金自動化,2009,33(3):20-25)
獲獎
[1]高精度冷連軋數字孿生與信息物理系統(CPS)關鍵技術研發及應用，冶金科學技術進步獎，一等獎， 2023
[2]面向高品質薄規格軋制的薄板坯連鑄軋制過程控制關鍵技術及應用，安徽省科學技術獎，二等獎， 2023
[3]寬帶鋼熱連軋智能化過程控制關鍵技術及應用，高等學?？茖W(xué)研究?jī)?yōu)秀成果獎（科學技術） 二等獎，2023
[4]第九屆中國國際“ 互聯網+” 大學生創新創業大賽北京賽區高教主賽道，學科競賽優秀指導教師 二等獎，2023
[5]鋼軋過程產品質量智能管控技術與平臺，冶金科學技術進步獎，一等獎， 2021
[6]面向多品規高精度軋制的CSP過程控制系統關鍵技術，冶金科學技術進步獎，一等獎，2020
[7]罐車用大規格鋁合金板材短流程制備技術集成開發與應用，廣西科學技術進步獎，二等獎， 2019
[8]寬幅鋁板帶熱連軋成套控制系統和關鍵工藝技術研發及應用，有色金屬協會科學技術進步獎，一等獎，2017
[9]交通運輸用超寬幅高性能鋁板帶1+4熱連軋生產集成技術的自主創新與產業化，廣西科學技術進步獎，二等獎， 2017
[2]面向高品質薄規格軋制的薄板坯連鑄軋制過程控制關鍵技術及應用，安徽省科學技術獎，二等獎， 2023
[3]寬帶鋼熱連軋智能化過程控制關鍵技術及應用，高等學?？茖W(xué)研究?jī)?yōu)秀成果獎（科學技術） 二等獎，2023
[4]第九屆中國國際“ 互聯網+” 大學生創新創業大賽北京賽區高教主賽道，學科競賽優秀指導教師 二等獎，2023
[5]鋼軋過程產品質量智能管控技術與平臺，冶金科學技術進步獎，一等獎， 2021
[6]面向多品規高精度軋制的CSP過程控制系統關鍵技術，冶金科學技術進步獎，一等獎，2020
[7]罐車用大規格鋁合金板材短流程制備技術集成開發與應用，廣西科學技術進步獎，二等獎， 2019
[8]寬幅鋁板帶熱連軋成套控制系統和關鍵工藝技術研發及應用，有色金屬協會科學技術進步獎，一等獎，2017
[9]交通運輸用超寬幅高性能鋁板帶1+4熱連軋生產集成技術的自主創新與產業化，廣西科學技術進步獎，二等獎， 2017
專利
獲得授權國家發明專利40余項
科研項目
作為負責人，主持與參加國家、省部級縱向項目15項，包括國家科技支撐計劃、863計劃等。負責企業橫向項目超過50項。